The DDJ-ERGO comes bundled with Atomix Productions Virtual DJ Limited Edition, that lets you scratch, mix and add modern remix effects to your music and video sets without paying for an upgrade. On top of the 4 decks with autosync, you get instant access to 8 samples, smart loops and much more. Pioneer DJ DDJ‑ERGO. The Pioneer DJ DDJ-ERGO is an ultra-compact 2-channel controller with large 115mm dual surface touch sensitive platters and stands to make room for your laptop. This hardware unlocks Serato DJ Lite for free when plugged into the software. Jan 23, 2014 We got an on-the-ground, inside look at the new Pioneer DDJ-SZ ultra 4-deck controller for Serato DJ at NAMM 2014. This comprehensive beast gives you the size and feel of a DJM mixer/two CDJ combination without all the cost. It has exclusive onboard effects, amazing performance pad modes, and a unique 2-port USB connection that lets you mix from two computers at once or swap out DJs without.

Sur Windows je suis pas douė. Par contre je pense que t'as un pb avec le port usb.
Je pense qu'en suivant une partie des étapes ci dessous tu devrais trouver ton pb. Désolé c'est en anglais ( je suis pas fort pour la traduction, donc je ne vais pas m'y risquer, mais je pense que c'est compréhensible)
DJ PRODUCTS
COMMUNITY
SUPPORT
LATEST
STORE
Serato Support My Setup MIDI
MIDI Troubleshooting Guide
If you are experiencing problems with your MIDI/DJ controller not connecting or behaving correctly, there are a few things you can check first which hopefully will ensure successful operation with Serato software.
Often overlooked, but the first thing we recommend is testing with several different USB cables to connect your device. Also, certain USB ports on your computer can function better than others. It's good to experiment with ALL ports on your computer before moving on.
Now try checking that it is being recognized. If your Operating System is recognizing your controller correctly, then it will more than likely work with your Serato software.
For Windows :
When you plug your controller in Windows should search for the drivers automatically (or it will ask your permission to). Some controllers require special software or drivers to run - these maybe on a disc that came with the controller. If you do not have this go to the controller manufacturer's website and find it there.
Sometimes Windows can install devices incorrectly. This usually happens when the device is recognized as being something else, other than the expected name of the device. We can check what your computer is recognizing your controller as by going to theDevice Manager.
This is usually found in : Start > Control Panel > Device Manager (Pictured above)
Your MIDI controller should show up in either :
- Universal Serial Bus Controllers OR
- Sound, video and game controllers
Most controllers will show up with the name of the manufacturer or the name of the controller.
If you have identified the controller in either of these lists and it shows up as something else, right-click on it and select uninstall. Now unplug then re-plug the controller to your computer and let Windows search for the drivers again. If it installs the controller incorrectly again, or there is a yellow exclamation mark next to the device logo please start a help thread here and give the moderator a detailed description of your issue and setup.
For Mac :
Some MIDI devices require mac drivers.
- In this case, you should check the manufacturer website for any mac drivers if they are available and install them. If they have been installed, you can check to see if they are there by looking here:
Mac HD > System > Library > Extensions > drivername.kext
If your MIDI controller is a class compliant MIDI device which doesn't require drivers you can check to see if it shows up here:
Go to: Applications > Utilities > Audio MIDI Setup > Window > Show MIDI Window
Your MIDI device driver should show up as an icon as example above shows. Sometimes even though this icon is shown in the MIDI Window it will not connect first time. You can disconnect your MIDI device and then with your device icon highlighted, select 'Delete device'. After doing this reconnect the MIDI device and the driver icon for this device should reappear. Now check to see if your device has been recognized.
If you have tried everything above but are still having problems then the next step is tocheck that your MIDI controller is communicating (sending / receiving) MIDI messages with your computer. This is the basic functionality of MIDI and if your controller is not communicating with your computer then it is not going to work.
We can check to see if MIDI messages are being communicated between the computer and the MIDI controller quite easily using a MIDI monitor.
If you are unsuccessful with connection and your controller is not sending MIDI messages, try testing your controller with a different computer by following the steps in this article.
This helps to narrow down the cause of the issue. If your controller is still not behaving correctly with a different computer, then it is possible that controller may be faulty.
However, if it is working correctly, then further troubleshooting may be required with your computer.
MIDI MONITOR FOR WINDOWS
Some computers come with their own built in MIDI monitor program, but for those that don't (or if you are not sure how to use this program) we recommend MIDI-OX. MIDI-OX is a Windows-only MIDI monitor that is free and easy to use.
Free download MIDI-OX HERE
You can use this MIDI monitor to:
1. Check that MIDI messages are being sent from your controller AT ALL
2. Check to see what kind of MIDI data is being sent
Once you have downloaded and installed MIDI-OX open it up and connect your MIDI controller.
Click to enlargen
Click to enlargen
Go to Options > MIDI Devices and double-click on your MIDI controller on the left both for MIDI Inputs AND MIDI Outputs. Your MIDI controller should now appear in both the Port Mapping and Port Map Objects boxes. Click 'OK'. (Pictured Below)
If you get to this point and MIDI-OX gives you an 'Undefined External Error' follow the steps here to try and resolve it.
Now we need to just check that everything is as it should be. It looks a bit intimidating but its actually quite simple.
First lets look at the buttons on your controller :
Press a button on your controller. When you press the button down a MIDI line should come up, when you let go of the button another line should appear.
All you need to check is that:
1. The NOTE is the same for the ON and OFF note.
2. None of the buttons on your controller are sending the same NOTE. This is a common problem and if you can see that more than one button is sending the same note then they will obviously be conflicting. What happens in this scenario is you will map something to that button in Scratch Live then you will map something to the button that sends the same note and then the first button is overwritten.
If you have buttons that are sending the same NOTE you will need to change the way your controller is sending notes. Some MIDI controllers have different MIDI modes (like the AKAI MPD range), so you will need to change to a MIDI mode that allows a different MIDI message to be sent from every button. Other MIDI controllers have software that allows you to change this - either way it is best to consult your manual or controller manufacturer on how to change this.
Now lets look at the faders and knobs on your controller :
With Endless Rotary knobs (knobs that have no start and end position) you just need to check that MIDI messages are being sent and that the only thing that differs for each message when you twist the knob is the number in the DATA2 column.
With Relative knobs and faders (knobs that have a start and end position and therefore are relative to the position on the hardware), you need to check that
A. Every movement of the knob/fader sends a MIDI message, and
B. The OFF position of the knob/fader sends a MIDI note of 00 and the ON position sends a MIDI note of 7F in the DATA2 column in MIDI-OX. (see picture below - click to enlarge)
A - Relative Knob/Fader B - Endless Rotary Knob/Fader
MIDI MONITOR FOR MAC
Some Macs come with their own built in MIDI monitor program, but for those that don't (or if you are not sure how to use this program) we recommend SNOIZE MIDI MONITOR. Snoize MIDI Monitor is a Mac-

Pioneer Ddj Ergo V Serato Scratch Live